FEDTRO 40106 UNIVERSAL ELECTRONIC FUEL PUMP 12V SOLID STATE 4.5-6 PSI 34 GPH

SOLID STATE UNIVERSAL FUEL PUMP 12 VOLT

4.5-6.0 PSI

MAX FLOW 34 GPH

40106

SOLD AS EACH

UNIVERSAL REPLACEMENT FUEL PUMP 

FEDTRO

Pressure Range: 4.5-6.0 PSI   Max. Flow: 34 GPH

Big fuel pump performance in a small pump package

Here are just a few of the many features of this pump:

- Universal electronic fuel pump, designed to replace hundreds of mechanical pump models.

- Compatible with all fuels and fuel additives. Eliminates vapour lock.

- Reliable solid state dependability, rugged construction, light weight, and a space-saving compact shape.

- Two-wire design, self-priming, and easy to install.

Features & Benefits:

- Universal Electric Pump: Fits all carburetor equipped cars, vans and light trucks.

- Easy to install: Two bolt installation plus the small size makes installation easy. For best results, mount the pump close to the fluid or fuel tank and below the liquid level.

Compatible With ALL Fuels (except methanol): No rubber diaphragms or valves to swell or deteriorate in alcohol blended fuels. Compatible with leaded and unleaded petrol, diesel fuel, blended alcohol fuels and fuel additives.

- Eliminates Vapour Lock: When properly installed on most vehicles, a constant smooth, dependable supply of fuel under pressure is assured in the hottest weather or in high altitudes.

- Light Weight - Compact: Less than 3 inches (7.62 cm) in any direction. A giant in output for its size.

- Self Priming: The pump is self priming to 12 inches (30.48 cm) fuel lift. No extended cranking in order to restart engine after running out of fuel.

- Lower Power Requirement: Standard 12 volt models require approximately one amp at maximum delivery.

- Built-in Pressure Relief: No flooding assures restarts on the hottest days.

- Solid State Reliability: Proven on thousands of various applications. 

- No electrical contacts. No bearing or diaphragms to wear out or fatigue. Lasts four to five times longer than many other electric pumps.

- Two-Wire Design: Electrically isolated case. Can be applied to positive and negative ground systems. Eliminates possibility of corroded ground connection.

- Corrosion Resistant: The all-steel case is plated for corrosion resistance.

- Supplied with 2 fittings and fuel filter.

- Comprehensive easy-to-follow installation instructions sheet.

Do not use with fuel injection systems