NULON G70 MANUAL GEARBOX & DIFF TREATMENT FOR SMOOTH SHIFT 125ml

NULON

MANUAL GEARBOX & DIFF TREATMENT FOR SMOOTH SHIFT 125ml

G70

SOLD AS EACH

Smooth Shift Manual Gearbox and Diff Treatment

Nulon Smooth Shift Manual Gearbox and Diff Treatment (G70) with PTFE offers maximum lubrication and anti-wear protection to the

gear and bearing surfaces of all types of gears (helical, spur and worm drive). Nulon G70 combines a balanced blend of

Polytetrafluoroethylene (PTFE) with other extreme pressure and anti-corrosion compounds. Nulon G70 is suitable for use with all

synchromesh rings and limited slip differentials.

The PTFE particles in Nulon G70 range from .4 to 40 microns. The smaller particles, when subjected to pressure and temperature,

impregnate the friction surfaces thus reducing friction and offering residual lubrication and corrosion resistance even during lay-up

periods. The larger PTFE particles circulate with the normal gear lubricant and create a cushion between gear surfaces, dramatically

reducing gear pitting. This cushioning effect is important in that it reduces noise caused by minor irregularities of mating surfaces

which are responsible for the very common "period noise" experienced in differentials.

Many modern gearboxes suffer from poor gear shifting when the gearbox is cold. As a result a number of manufacturers are

recommending a lighter grade of oil, and in some cases automatic transmission fluid. These lighter grade oils provide superior gear

changing at the expense of reduced life of gears and bearings, because the lower viscosity oil does not have the degree of EP

(extreme pressure) protection. Nulon G70, due to its EP characteristics, will greatly improve protection as well as dramatically improve

gear changes.

Note: G70 is suitable for all gearboxes including passenger cars, trucks and industrial gearboxes.

G70 is also compatible with, and suitable for use with, automatic transmission fluid and engine oils, where they are the

manufacturer's recommended lubricant for manual gearboxes.

 

Benefits

Reduced friction and wear

Smoother gear changes

Quieter operation

Extended component life

Reduced oil leaks

Improved extreme pressure protection

Residual lubrication during lay-up periods

Corrosion protection

Reduced operating temperature

Reduced energy consumption in industrial gearboxes

 

Directions for Use

Simply add required amount of G70 (according to application rate chart) to the gearbox or differential.

Repeat application with each oil change.

Application Rates

Up to 8 litres (8 quarts) oil - Add 125 ml (4.23 US fl oz) per 2 litres (2 quarts)

Over 8 litres (8 quarts) oil - Add 500 ml (17 US fl oz) + 3% by volume thereafter.

Warning:

Do not use G70 in automatic transmissions.

Note: Nulon G70 is suitable for use in Laycock overdrive units as used in MGs and Triumphs